Mixed Media Tealight Holder Alteration

Good morning everyone. It's my turn (Julia) to share an ATP Exchange Post where we do something a little different for your inspiration.

One of my favourite things to do is to alter new or secondhand items so they look more to my taste, may be given as gifts or alternatively used in my own home.

This week, I'm going to show how I've altered two small tealight holders which are available from Artist Trading Post.

These tealight holders are hollow so not as heavy as they look.

I wanted to make them look old and somewhat beaten up so chose to use paints and mediums to help. Here's what they looked like after I finished:

They are a little in shadow here but you will be able to see more detail in later images.

Both holders are given two coats of gesso and a light sanding in between coats. This is followed by using a stencil (find similar here) and modelling paste to create a design on three sides of each holder.

The holders are given two coats of Fresco paint in Snowflake. I want to have a good surface for the mediums to follow.

Initially I wanted to leave the metal candle holder as it was but this wasn't my best idea!

Each metal holder is given a coat of Snow Cap Alcohol Ink. To age the container, some Espresso Alcohol Ink is applied.

The alcohol ink is applied with a baby wipe. For some reason it seems to help the colour to split and the Espresso becomes a lovely rusty colour.

The blocks are now painted with Fresco Vintage Lace.
The next step is to add colour to the modelling paste. Fresco paint in London Night is added first followed by a light dusting of black Pan Pastel (find similar here). A good tip is to replace your stencil over the design and add your chosen product through this.

A light touch of Treasure Gold White Fire is added with foam through the stencil. This mixes nicely with the pastel to create a grungy look.

Each face with the stencilled paste is then coated with crackle glaze which is antiqued with acrylic paint when dry.

The fourth side on each holder is stamped with a PaperArtsy Mini Stamp (find similar stamp here) Versamark (or similar) then embossed with detail gold embossing powder - sorry, I forgot the photo for this stage! A coat of crackle glaze is then applied which is antiqued with acrylic paint once dry. Strangely, the gold embossing powder turns quite a pewter colour under the glaze but I like this very much.

To age the blocks, small pieces are cut away with a sharp knife.

To age the cut areas and edges of the holders, Archival Ink is applied with some cut n dry foam.

Two butterfly charms are coated with Snow Cap Alcohol Ink - I used an old cheap paintbrush for this task as it can be difficult to remove. This is followed by lots of Espresso Alcohol Ink, various acrylic paint colours and crackle glaze.

When the crackle glaze is dry, some antiquing cream or acrylic paint is applied and left to dry a little.

The paint is wiped away with a baby wipe leaving it behind where required. It slips into crackle glaze cracks really well and gives a great look. I will probably dirty this up a little more with some black acrylic paint and finish with some matte medium just to tone down any shine. I rather like the butterfly on the left too but perhaps it's a bit shiny for this project!

A hot glue gun is used to fix the butterflies to the embossed face of each holder. Acrylic paint is then used sparingly to give the effect of rust runs from the butterfly. This image clearly shows where the holder has been cut with the knife to give it that aged appearance - once the archival ink is added of course!

Once the holders are finished, a nightlight is added. I'm pleased with the rusty effect created by the alcohol inks.

Always difficult to see any sheen in a photo so I thought I'd hold this one and photograph it at the same time! Interesting to see the different tones in the Treasure Gold - I've probably mixed my colours a little in the pots!

Finished holders complete with lighted candles.

A night time photo so not perfect but here are my grungy, altered candle holders on the fireplace in my lounge.

Really pleased with these and even Husband says they look good there!

I hope this post inspires you to either buy a product ready for altering or perhaps have a look around the house and see what's hiding there just begging  for a makeover! Check out the stock at the Artist Trading Post for all your alteration needs and products.

Julia
x

Flower Power !

Hi everyone. Julia here with a new challenge from Artist Trading Post Exchange. I do hope you are all keeping safe and warm if your weather is really wintery! I get fed up with grey days, rain, poor light and the cold so it seemed like a good idea to cheer ourselves up. 

Here's my challenge to you:

'January is often a very grey and dark month. With this in mind, I'd like to brighten things up a little and bring some summer fun into the winter. Using a Mixed Media style, I'd like you to make some handmade flowers and use them on a project of your choice.

Remember we are a Mixed Media challenge and stamping must be included, but no digi images please. A maximum of 10 challenges can be entered including ATP Exchange.

The team have come up with some wonderful inspiration for you so why not scroll down the page then click on their names to visit their blogs and find out all the details.

Artist Trading Post generously provide a £10 voucher for our winner each time. There's always the chance to be in the top three too and have a blinky for your blog!

Julia

Yvonne

Toni

Ruth

Annie

Sue

I'm sure you'll agree that the team have come up with some wonderful inspiration for you today. We just know that you're going to amaze us with your creativity too so what are you waiting for? Let's get started!

One small reminder: do pop back on Saturday 24th January to see who is the winner and the runners up (in no particular order!) chosen from Sue's fab challenge 'Fresh Beginnings. . . ' at the start of the month.

An InLinkz Link-up

Exchange Day Post - Playing With Gelli Plates

Morning everyone. Julia here with another Exchange Day post for you. I have been trying out a few things on my Gelli Plate which I thought you may like to see. I am really quite a novice at this technique and tend to stick to the basics but it is one of the most fun ways I know to produce background designs which can then be developed into something more inspirational. My Halloween tag was made using a multi layered gelli print.

I think I love the gelli plate so much because you can achieve quick, unique results using some basic tools and acrylic paint.

In the following images, I show you some basic techniques and end uses for the prints made. There are lots of pictures so grab a warm drink and settle down somewhere comfortable before you start!

Essential equipment along with the gelli plate is a brayer. I only have one size of brayer but I do know that some people think it's good to have a variety of different sizes.

Keep the gelli plate on one of the clear plastic sheets that it's packed in and place it on a non stick craft mat. Apply some small blobs of your chosen acrylic paint. Better to start with too little than too much - you can always add more if needed.

Using the brayer, roll the paint out until an even, thin layer covers the gelli plate. For the first print I have laid a stencil onto the paint. A piece of paper/card should then be carefully laid down on top of the stencil. Smooth the paper/card out all over with your fingers making sure the stencil does not move.

The print on the left is the first one to come off the gelli plate. It has two shades of yellow because when dry it was coated with mustard seed distress stain. The print on the right is pulled from the plate after first removing the stencil. You can usually take a first print followed by a second or 'ghost' print both of which can be amazing.

Matte medium can be used to create resist designs with the gelli plate. The medium is rolled out with the brayer using the same method as when adding paint. Remember to clean the Gelli Plate thoroughly after using both acrylic paint and Matte Medium. If you need to leave some paint in place for a short while, mist the surface of the plate lightly with water. This will keep it useable for a short time.

In this image you can see the white areas where the matte medium has left the substrate white. The magic happens when the matte medium print is covered with distress stain. Using a combination of paint and distress stain/ink can work wonderfully well together as long as it is remembered that the paint is permanent but the distress ink will always react with water. Archival ink can be used along with some cut'n'dry foam if a permanent finish is needed.

In this image I show how to add further depth to the matte medium print. The stencil was laid back onto the print and some distress ink was applied through a variety of stencils using blending foam. This adds wonderful detail particularly when using a large stencil to pull the print from. In a later image you will see that I finished this print by using coloured pencils to shade around the design. One print: three different mediums used.

The other print turned into a bit of a mess because I tried to add various layers with another stencil and various colours. What to do with this one?

Replace the original stencil and use stamps and archival ink to begin building layers.

Add a thin coat of translucent acrylic to tone down and unify the colours.

Some tattered florals are die cut from the print to be used in a future project.

The die cuts were antiqued with crackle glaze followed by antiquing cream. Next they were shaped and made into a flower.

The centre of the flower is made with a bead and some hand dyed seam binding.

The print in the bottom right hand corner was further enhanced with stamps, archival inks, stencils and acrylic paint.  Here's what happened to the print afterwards:

ATC's are cut and enhanced with stamps and archival ink.

Flowers are die cut and further stamped with archival.

The centre of the flower is made with a spacer bead and some hand dyed seam binding.

A completed flower for a future project.

Two ATC's, a flower and a tag from one gelli plate print. The tag will obviously require further work.

Two tags and two ATC's from one multi-layered print.

Multi layered print close up.

A print which didn't go quite as planned. Rescued by adding distress stain to the white areas.

Use a pencil to add shading and other details to the print. Cut out various sizes of circles with punches. These can be used on future projects such as cards and canvases with further enhancement possibilities.

Detail of one circle showing base colour, stamping in second colour and pencil details added.

Stamp applied to paint on plate and a print is pulled.

One bird cut from the print which can be further developed.

Paint on the plate can be marked with any tool that will make a pattern - just remember that the item you use must not be sharp or you will damage the surface.

Print pulled from the plate. Image shows marking tool available in a variety of styles. The paint used was translucent and highly pigmented. The card is lightly textured - this creates a pattern as well so is worth trying.

Flowers punched from print scraps. These can be altered with crackle glaze etc.

Two card mats and an ATC waiting to be developed.

Skulls stencilled onto one of the  prints below which is finished with distress stain. Ready for Halloween next year!

Two prints pulled one with the stencil in place and the other after removing the stencil.

The background of one of the above prints is coloured with distress stain. Flower shapes are die cut for future use.

Further printing added to enhance a simple print which is then cut into two shapes.

Remember that piece of textured card used for cleaning the brayer and for the stamp practice? 

An ATC is die cut from the brayer card. I chose a section that I'd cleaned my stamp off on too for added interest. An Audrey Hepburn image is stamped with archival then embossed with clear EP to give it more impact.

On the left side of Audrey I used a pencil to add a little shading. Some flowers were punched from scraps of the same card. A ring image was stamped onto the ATC followed by the placement of the flowers on top. The middles are stick on gems and a stick on pearl coloured with alcohol ink. She needs more work but this is just to show how quick and easy projects can be to get started when you have some homemade backgrounds to choose from.

I hope this post gives you the inspiration to have a go with a Gelli Plate if you haven't tried one yet. Or, it might nudge you to get that one out that you bought and haven't used yet!

I have a brilliant Gelli Plate book by Joan Bess which has so many Gelli Plate techniques to be tried. It's straight forward and not pretentious at - my kind of book!

A must have for Gellli Plate lovers - available at the Artist Trading Post HERE

Many of the products I have used are available from the Artist Trading Post. I have given links to these or products they stock which are very similar.

I know this has been a long post but I hope you've enjoyed reading it! Thank you for visiting.